The forum has long-term cooperation with IEEE. High quality papers Contributed to SSLCHINA and IFWS will be published in the Xplore IEEE electronic library after selecion.
Date: November 1st-3rd, 2017
Venue: Hilton Beijing Capital Airport, Beijing, China
Program Committee
Tech Chair
JIANG Fengyi——Vice President of Nanchang University
Tech Co-Chairs
LUO Ming/Ronnier LUO——Professor at Department of Optical Engineering, Zhejiang University
Jay LIU——Executive Vice President & CTO of ShineOn (Beijing) Technology
WANG Junxi——Professor at Semiconductor Institute of Chinese Academy of Sciences; Vice Director of Research and Development Center for Semiconductor Lighting Chinese Academy of Sciences
ZHANG Junming——Professor at Zhejiang University; Deputy Dean of Power Electronics Research Institute
YANG Qichang——Professor & Director at Institute of Environment and Sustainable Development in Aguriculture, CAAS
QU Jia——Dean and Professor at Eye Hospital of WMU Zhejiang Eye Hospital
LIAO Liangsheng——Professor at Soochow University
ZHAO Lixia——Professor at Semiconductor Institute of Chinese Academy of Sciences
MOU Tongsheng——Professor at Zhejiang University
CHEN Zhen——Standing Deputy GM of Lattice Power (Jiangxi) Corporation
HOST
China Solid State Lighting Alliance (CSA)
China Illuminating Engineering Society(CIES)
STRATEGIC SUPPORTER
Zhongguancun Science Park Shunyi Park Management Committee
SUPPORTERS
Department of High and New Technology Development and Industrialization, Ministry of Science and Technology
Department of Western Development, National Development and Reform Commission
Department of Resource Conservation and Environmental Protection, National Development and Reform Commission
Industrial Standards Department Ⅱ of Standardization Administration of the People's Republic of China (SAC)
Science and Technology Commission of Beijing Municipality
ORGANIZERS
Beijing Solid State Lighting S&T Promotion Center
Beijing MKQ New Material Productivity promotion Center
China Solid State Lighting online (www.china-led.org)
The forum has a long-term cooperation with the IEEE. High quality papers contributed to SSLCHINA will be published in the Xplore IEEE electronic library after selecion.
CONTENTS
P201: Materials and Equipment Technologies
LED general lighting has entered into the critical period of large-scale outbreak. It is still very important to further improve the luminous efficiency of LED and reduce the preparation cost of LED. At present, LED still has a large room to improve in the areas of epitaxial method, energy conversion efficiency, thermal energy management, production equipment and process control. Materials and equipment technology is essential to improve the cost-performance ratio of LED, and drives the development of LED lighting market.
Scope:
Solid State Lighting Related Substrate Material
Nitride Epitaxial Technology
Epitaxial and Substrate Related Equipment Technology
Testing Technology and Equipment
New Material Technology(eg. Graphene, Oxide, Boron Nitride, etc.)
Material Process Control and Cost Management
Sub-forum Chair:
WANG Junxi——Professor at Semiconductor Institute of Chinese Academy of Sciences; Vice Director of Research and Development Center for Semiconductor Lighting Chinese Academy of Sciences
Sub-forum Members:
XU Bingshe——Vice President and Professor of Taiyuan University of Technology
ZHANG Baijun——Professor at Sun Yat-Sen University
GUO Xia——Professor at Beijing University of Posts and Telecommunications
LI Dabing——Professor at Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences
BI Wengang——Professor at Hebei University of Technology
P202: Technologies for Chip, Packaging and Modules
The rapid development of white LED in the past ten years has been focusing on light efficiency and cost. Under the environment of new economy and new driving forces in 13th Five Year Plan, what are the development opportunities for LED industry? What are the latest development of manufacturing technology of chip and package? Flip chip LED into the mature period, its performance advantage and price adjustment affects not only the market trend of chip, but also the technology trend of package and module. The wide application of flip chip promotes the technological revolution of chip scale package (CSP) and FC-COB with high power and high light density, changes the situation that traditional package stents and high power ceramic package occupy important position. Recently GaN on Si based LED won the National Science and Technology Invention Award, become a hot topic in the industry again, how does it change market prospects of chip and packaging applications?
What is the latest progress and development tendency of technologies, such as LED chip process, package material, fluorescent powder coating, lens design, wafer level package and integrated optical engine driven by high voltage AC (DOB)? What role do these technologies play in the industrial structure change in the future? Please pay attention to the latest development of chip, package and module technology.
Scope:
New Progress of LED Chip Manufacturing Technologies
High Efficient UV, Blue, Green and Red Chip Technology
Mounted Chips, Flip Chip and Vertical Chip Technology
Latest Development of LED Packaging Materials (Substrate, Solid Crystal Materials, Silica Gel, Fluorescent Powder, etc.)
Fluorescent Powder, Quantum Dot Technology and Coating Technology
Lens Design and Optic Module
Chip level and Wafer Level Packaging Technology
Multi-chip Packaging, Design and Optimization of COB
New Development of Light Source with High Quality and Full Spectrum
Advanced Packaging Technology and Manufacturing Technology with High Sigma and Low Color Tolerance
The New Generation of LED Light Source and Light Engine
Sub-forum Chair:
Jay LIU——Executive Vice President & CTO of ShineOn (Beijing) Technology
Sub-forum Members:
YI Xiaoyan——Professor at Semiconductor Institute, Chinese Academy of Sciences
JIN Peng——Associate Professor at Green Lighting Laboratory, Peking University
YUN Feng——Professor at Xi'an Jiaotong University
GUO Weiling——Professor at Beijing University of Technology
MO Qingwei——Deputy Director of Elec-Tech International
P203: Technologies for Reliability and Thermal Management
Technologies for reliability and thermal management has always been an important factor restricting the quality of LED lighting, and now the concerns on the reliability of a single LED product has changed to the reliability of entire system. In the process, reliability of the whole system will be affected by advances in technologies such as novel materials for heat dissipation, thermal management technology, research and design for reliability of LED lighting system, fault data and failure analysis, control and reliability screening in manufacturing process, accelerated life testing method, failure mode and simulation etc.
Scope:
Novel Materials for Heat Dissipation
Thermal Management Technologies
Research and Design for Reliability of LED Lighting System
Fault Diagnosis and Prediction
Failure Detection and Failure Analysis
Accelerated Life Testing and Prediction Methods
Failure Mode and Simulation
Control and Reliability Screening in Manufacturing Process
Sub-forum Chairs:
ZHAO Lixia——Professor at Semiconductor Institute of Chinese Academy of Sciences
Gordon ELGER——Professor at Technische Hochschule Ingolstadt,Germany
Sub-forum Members:
YANG Daoguo——Professor and the Dean at School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology
LUO Xiaobing——Professor at Huazhong University of Science and Technology
P204: Driver, Intelligence and Control Technologies
Intelligent lighting products has been gradually integrated into the smart home system; Intellectualization, digitalization and controllability are leading the development trend for future LED lighting industry, from constantly improving and extending the life of driver circuit to keep pace with longer LED life, to gradually making progress in intelligent lighting. There are some important topics, such as thermal management and high performance driving scheme, new driving circuit and IC, LED dimming and color temperature technology, solution for controlling lighting products, wireless control technology, intelligent LED lighting and new Interconnect technology, intelligent LED lighting system and sensor technology etc.
Scope:
Power Management and High Efficiency Driving Solutions
IC New Drive Circuit and Integrated IC
LED Dimming and Modulating Color Temperature Techniques
Solution for Controlling Lighting Product
Wireless Communications (ZigBee, Bluetooth, Wifi, Thread, etc.)
Visible Light Communication Technologies and Applications (Lifi, etc.)
Integration Of Intelligent Lighting and Smart Home System
New Interconnection Technologies
Intelligent LED Lighting System and Sensor Technology
Modularization and Standardization of Drives
Network Intelligent Lighting and POE Lighting Technologies
Sub-forum Sub-forum Chairs:
ZHANG Junming——Professor at Zhejiang University, Deputy Dean of Power Electronics Research Institute
SONG Hongwei——Professor at Zhejiang University, President of Zhejiang Fonda Technology Co.,Ltd.
Sub-forum Members:
Mike YANG——Managing Director of Tridonic (Shanghai)Co., Ltd.
TONG Min——Research General Manager of Shanghai Feilo Acoustics. Co. Ltd
WANG Yong——CTO of Chipone Technology (Beijing) Co.,Ltd.
P205: LED Lighting in Bio-Agriculture
Light is one of the most important factors in agricultural production, which plays a pivotal role in regulating growth and development of animal and plant as well as microorganism, and plays irreplaceable role in achieving high yield, high quality and high efficiency. Particularly in modern agricultural production systems, artificial light has been widely applied in new fields such as planting industry, breeding industry, aquaculture and marine fishing, propagation of edible fungi and microalgae, and plant protection by trapping insects etc. In recent years, the application of LED has provided new vitality for development of artificial light in modern agriculture. Investigations showed that output value of the new light source is expected to be in hundreds of billions RMB during the 13th Five-Year Plan. Currently, the fundamental application research of LED in bio-agriculture is very active, and some progress have been achieved in mechanisms of animal and plant responding to light quality, “light recipes” research, and LED lighting technology in bio-agriculture and its application demonstration in modern agriculture etc. However, some fundamental questions and industry developmental orientation are needed to be further explored, such as establishing data base of light recipes for bio-agriculture, developing LED lighting facilities with high efficiency for bio-agriculture, jointing LED industry and modern agriculture industrial chain effectively, et al. Bio-agriculture session of SSLCHINA will provide a platform to explore these questions and catch the industry pulse.
Bio-agricultural lighting session will assemble domestic and foreign experts to focus on the current hot points and leading questions of LED applied in agriculture, discuss the latest progress and development in mechanisms of animal and plant responding to light quality and “light recipes”, and explore new concepts, new technologies, and new achievements in LED combing with modern agriculture such as plant factory, breeding factory, supplementary lighting in greenhouses, livestock breeding, propagation of edible fungi and microalgae, and plant protection by trapping insets. This session will point out the orientation for the application of LED lighting in modern agriculture.
Scope:
Advances in Biological (Animal and Plant) Responses to Light Qualities
Bio-Agricultural Light Recipes Technology
Manufacturing Technology and New Technology of Bio-Agricultural LED Lamps
Advances in LED Modern Agriculture (Plant Factory, Breeding Factory, Supplementary Lighting In Greenhouses, Livestock Breeding, Propagation of Edible Fungi and Microalgae Plant Protection by Trapping Insets)
Energy Saving Design in LED for Bio-Agriculture
Intelligent Control Technology of LED for Agriculture
Design and Optimization of Low Cost LED for Agriculture
Sub-forum Chair:
YANG Qichang——Professor at Institute of Environment and Sustainable Development in Aguriculture, CAAS
Sub-forum Members:
HE Dongxian——Professor at China University of Agriculture
PAN Jinming——Professor at Zhejiang University, President of Hangzhou Langtuo Biotechnology Co., Ltd.
LIU Ying——Dean and Professor of School of Marine Science and Environment Engineering, Dalian Ocean University ; Chair of Aquacultural Engineering Society
XU Hong——General Manager of LumiGrow, Inc.
XU Zhigang——Professor at Nanjing Agricultural University
P206: Light Quality and Lighting for Health and Medicine
With the development of LED lighting and its control technology, people begin to pursuit excellent optical quality instead of high photosynthetic efficiency. LED light source is compact, easy to control and adjustable which provides opportunities and challenges for providing lighting with healthy light quality. With the expanding of application requirements, it has important significance in upgrading LED light quality and providing healthy and comfortable lighting environment by optimizing LED lighting and its control system and using them reasonability in light environment design of indoor and outdoor.
At the same time, in recent years due to in-depth study on the mechanism of the effect of light on human health and the success of LED device development, application of LED in daily life and medical light have increased, becoming a new blue ocean of LED application. But it still needs further discussion on the role and impact of visual development and visual physiology etc. A lot of problems on the device research and development are still needed further study by industry experts.
Scope:
Photobiological study of light radiation damage and health conditioning
Study on the Mechanism for the Effects of Light to Visual Health
Study on New LED Light Source for Health and Medical Applications
Light Environment Design for Healthy Lighting
Control Technologies for LED Healthy Lighting
Quality evaluation and Application of LED Light Environment
evaluation and Standardization for Healthy Lighting and Optical Medicine
Clinical Trials of LED Phototherapy
LED Typical Applications in Healthy Lighting and Optical Medicine
Sub-forum Chair:
QU Jia——Dean and Professor at Eye Hospital of WMU Zhejiang Eye Hospital
MOU Tongsheng——Professor at Zhejiang University
Sub-forum Members:
XIONG Daxi——Professor at Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences
LIN Yandan——Professor at Fudan University
SHAN Lihong——Professor at Harbin Medical University
CAI Jianqi——Director at China National Institute of Standardization
P207: Novel Display and Lighting Technologies
Semiconductor light emission devices are the fundamental of displays and solid-state lighting. Novel display and lighting technologies have been well developed these years because of systematically investigation of light emitting devices, and offer a bright future of versatile applications of information displays and lighting. The devices for novel display and lighting include: Organic Light Emitting Diodes (OLEDs), Quantum Dot LEDs (QLEDs), Perovskite LEDs (PerLEDs), Graphene LEDs, Micro-LEDs, etc. Key technologies of these devices include: light emitting efficiency, I-V characteristics, emission wavelength, color rendering index, stability and reliability, etc. The novel display and lighting technologies also include design and fabrication of novel backplane, pixel circuits, optimization of fabrication process, even laser-related technologies. Progress of these technologies is very important to novel displays and lighting technologies.
Scope:
High Performance OELD Materials, Devices, and Applications
QLED, Perled, Hybrid Device Structures
Micro-LED Technologies
Wide Spectrum Light Emitting Devices And White Light Emitting Devices
High Performance Light Emitting Materials
Operation Principle Of Light Emitting Devices
Reliability Of Light Emitting Devices
Advanced Thin Film Technology
Flexible Backplane And Packaging Technology
Transparent Conductive Materials
Laser Display And Lighting
Micro-Displays
High Density Small Pitch LED Displays
Displays And Lighting For Special Applications
Graphene Lighting Technology
Sub-forum Chair:
LIAO Liangsheng——Professor at Soochow University
Sub-forum Members:
XU Zheng——Professor at Beijing Jiaotong University
HUANG Xiuqi——CTO of Visionox
LI Yi——General Manager & CTO of ShenZhen Appotronics Technology Co., Ltd.
PENG Xiaogang——Professor at Zhejiang University
LIU Zhaojun——Assistant Professor at Southern University of Science and Technology
YI Xiaoyan——Professor at Semiconductor Institute, Chinese Academy of Sciences
FOR INTERNATIONAL FORUM ON WIDE BANDGAP SEMICONDUCTORS CHINA (IFWS 2017) CONCURRENT EVENTS
S1: SiC Materials and Devices
S2: GaN Power Electronic Devices
S3: Application and Reliability of Power Electronic Device Packaging(SiC, GaN)
S4: RF Technology based on Wide Bandgap Semiconductors
S5: Wide Bandgap Semiconductor Solid-State Ultraviolet Devices
S6: Ultra Wide Bandgap Semiconductor and Other New Semiconductor Materials
REVIEW PROCEDURE
1. Authors must submit extended abstracts in advance.
2. Authors will be informed of paper acceptance with categories of Oral Presentation, Poster Presentation and Conference Proceedings.
3. Authors prepare final submissions depending on the following status:
1) Oral Presentations: Authors need to prepare paper and presentation files (PPT/PDF)
2) Poster Presentations: Authors need to prepare paper and poster files (The Technical Program Committee will audit the posters and inform the authors. Authors need to prepare posters according to the template and bring the hardcopy posters to the designated Poster Display area for wall mounting).
3) Conference Proceedings: Authors should prepare the papers. Authors have to prepare final papers according to the guidelines and given template.
Note:
1) The template can be downloaded from the paper contribution platform of the forum: http://www.sslchina.org/en/paper/ Authors are required to prepare papers and other materials based on the provided template in time to pass the review successfully.
2) High quality papers Contributed to SSLCHINA will be published in the Xplore IEEE electronic library after selection.
PAPER REQUIREMENTS
1. Basic Requirements
1) The paper should not have been published in other technical publications or by other technical conferences.
2) Prominent theme, distinct content, accurate data, rigorous discussion, clear conclusion and adopted legal measurement unit.
2. Abstract Submission
Authors are required to submit extended abstracts according to the paper format template given on the conference website.
3. Paper Format
The paper should be written according to the paper format template given on the conference website. The papers should adopt Word format. The total pages of the paper are limited to 4.
4. Language of Abstracts, Posters and Papers
1) Abstracts/posters/papers have to be in Standard English.
2) Both Chinese and English are acceptable for oral presentations, but only English can be used for the presentation files (PPT/PDF) and conference proceedings.
Note: No commercial promotions allowed for specific companies and products; otherwise, the papers will not be selected for oral presentations and conference proceedings.
importANT DATES & METHOD OF SUBMISSION
1. Deadline for abstract submission: June 15th, 2017.
2. Paper acceptance notification: July 3rd, 2017
3. Deadline for full paper submission: September 15th, 2017
4. Full paper acceptance notification: September 30th, 2017.
5. Deadline for softcopy submission of presentations PPT and posters: October 15th, 2017.
For further questions about the paper submission, please contact
Lu BAI
Telephone: 010-82387600-602
Email: papersubmission@china-led.net
Download Templates Here:
1. SSLCHINA2017 Call for Papers Notice.pdf
3. SSLCHINA2017 Abstract Template.doc